The Wireless Flash RF60 is a portable flash that has a built-inwireless transmitter + receiver – THREE things combine into one.
What are the advantages of using Wireless Flash RF60?
With a transceiver built-in, the RF60 can receive wireless triggering signal from a flash trigger and fire accordingly without having to attach an external receiver to the flash. When using with Cactus V6, both power output and zoom level of the RF60 can be adjusted remotely by Cactus V6.
Also because of the built-in transceiver, the RF60 itself, without anything attach to it, can function as a commander to control other RF60s. If you place an RF60 on a camera hot shoe, you can wirelessly control other off-camera RF60s without using ANY flash trigger at all.
Built-in wireless commander and receiver
The Cactus RF60 is a 2.4GHz radio-based wireless portable flash with a built-in transceiver that runs on 16 channels. It operates in three modes, Local for on-camera operation, Master and Slave modes for off-camera. To act as a commander, set an RF60 to Master and it can trigger an unlimited number of RF60 set in Slave mode. The effective distance between the Master RF60 and Slave RF60 is up to 100m (328 feet).
Remote control of power and zoom levels
The power levels of the RF60 set in Slave mode can be adjusted from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. With remote power and zoom control, you can place the RF6 units in hard-to-reach places and control its power and zoom level wirelessly.
Group control of up to four groups with configurable Group Alias
In a typical lighting setup, the ability to adjust, activate and deactivate groups of lights is vital in creating the desired lighting effect. The RF60 can be configured into four distinct groups. Power output can be adjusted in individual group or in all groups at the same time for fast adjustments. To streamline the shooting experience, user can rename each group to: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT instead of remembering the placement of flash groups A, B, C and D.
Optical Slave with delay feature
The RF60 has a built-in optical sensor. The optical sensor captures pre-flash signals that are being emitted earlier than the flash sync. By setting the pre-flash optical trigger and the delay timer, you can set the exact time for the flash to start firing. This allows the RF60 to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but can fire at any given point of the image.
High power up to Guide Number of 56 meters
The RF60 has powerful guild number GN56. The Fresnel lens was specifically designed to give out the best possible light.
Compatible with Cactus V6 Wireless Flash Transceiver
Flash power output on RF60 Slave units can be controlled by an RF60 Master as well as Cactus V6 Flash Transceiver. Cactus V5 also supports basic flash triggering on the RF60 but does not support power output control on the RF60.
In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so its users can create the desired effects with both on and off camera flash.
HSS Sympathy mode
The HSS Sympathy mode of the RF60 is designed to support flash photography at shutter speeds beyond a camera’s maximum sync speed. With the help of a TTL flash mounted on camera, RF60 fire flashes with an extended duration in order to produce even frame illumination at shutter speeds as high as 1/8000 second.
The RF60 is meant for use in a multiple flashes setup and designed with the needs from the need of professional photographers in mind.
Whether it’s a wedding or commercial shoot, timing is crucial. RF60 users will not only find adjustments quick and easy, the LCD also displays necessary information photographer needs to know. All in all, it offers an intuitive flash photography experience. So you, as the photographer, do not need to fiddle with the gear but instead enjoy the shooting experience.
Cactus V6 Wireless Flash Transceiver
The Cactus V6 is the World’s First wireless flash trigger that works ON ANY CAMERA (with a standard hot shoe or PC Sync port) to control power output, wirelessly, of Canon, Nikon and Pentax’s system flashes ALL AT THE SAME TIME.
Remote Power Control of Canon, Nikon and Pentax flashes
Each flash model has its individual power level characteristics. We have profiled more than 30 popular flash models across a wide range of brands so that the V6 can precisely control their output levels. With this unique feature, photographers can remotely control the flash power of various flash models, even of different brands.
Currently, more than 30 popular flash models from Canon, Nikon, Pentax, Metz, Nissin, etc. have been profiled and pre-installed on the V6. By selecting the pre-installed flash model on the Cactus V6 the photographer can remotely control the flash power output of the selected flash model wirelessly through the Cactus V6.
If a flash model is not listed, the V6 may even learn its flash profile and then be able to control the power output of the flash. (See note on compatibility)
Remote Power and Zoom Control of Cactus RF60 Wireless Flash
The V6 can directly control a Cactus RF60 set to Slave mode using RF60’s built-in radio transceiver. Besides controlling power remotely in single and multiple groups, the V6 can also adjust the zoom level of the RF60 easily by pressing the adjustment wheel and swap control between power and zoom.
Quick Power Adjustments
Control is extremely easy and swift with the use of a selection dial and a combination of group buttons. V6 can control multi-group power output in just one quick slide which is faster than any manual system available in market. To adjust an individual group, simply press and hold the group button and scroll the adjustment dial at the same time and changes will be instantly made on the V6 RX unit.
Absolute Power Control
V6 can benchmark the power output of flash models with different GN. In Absolute Power mode, EV numbers can be used to specify an absolute light intensity, independent of the maximum power output of a flash model.
V6 is so advanced and precise that 0.1EV power level can be adjusted, even if the flash does not offer that option*.
*0.1EV increment applies to certain flash models only. Please check the user manual for compatibility.
The V6 transceiver comes with a multi-system shoe that supports TTL pass through. With TTL pass-through, the TTL flashes behave as they would when directly connected to the camera hot shoe.
Flash model profiles pre-installed in V6:
Canon system models:
- Cactus AF45C, AF50C;
- Canon 320EX, 430EX, 430EXII, 540EZ, 580EX, 580EXII, 600EX-RT;
- Godox V860C;
- Metz 36AF-5, 44AF-1, 50AF-1, 52AF-1, 58AF-1, 58AF-2;
- Nissin Di866 MARK II, MG8000;
- Phottix Mitros;
- Sigma EF-500 DG SUPER;
- Yongnuo YN568EX II;
Nikon system models:
- Cactus AF45N, AF50N;
- Metz 36AF-5, 44AF-1, 58AF-2;
- Nikon SB-24, SB-28, SB-600, SB-700, SB-800, SB-900, SB-910;
- Nissin Di700, Di866;
- Sigma EF-530 DG SUPER;
Pentax system models:
- Cactus AF45P, AF50P;
- Metz 36AF-5, 44AF-1, 50AF-1, 58AF-2;
- Pentax AF 360FGZ, AF 540FGZ;
Notes on compatibility:
•長度： 3.34（85毫米）•寬度： 2.36（60毫米）高度： 1.18英寸（30毫米）
而家想買一套外國 Pack 燈起碼過萬, 諗都唔洗諗 (你有米另計), 重量最少 十幾廿磅, 影次想好似打仗咁, 而家就唔同啦 , Bowens 呢款 Power Pack 真係窮人玩壓光的救星 , 首先重量只係 4.1kg , Size 180 x 120 x H130mm , 細細粒唔阻定, 價錢先給引, $3000 唔洗, 真係庶渣價錢 燒鵝味道!
GM400 + Hire Power Pack 而家賣緊 $5680 咋, 同級數的外影燈半價的價錢~心動嗎?
配件夠硬凈同輕, 又有個靚套, 問你點頂
LEDZILLA – On Board Light Head Mini Led
DLOBML • DedoLight On Board Mini Led
A single, high-power LED Light Head
• Amazing output in combination with the Dedolight double aspheric optics.
• Focuses like a Dedolight. LED lights are not usually focusable.
• No other focusing LED light compares – 4° to 56°.
• Smooth light distribution in all and every focusing position.
• Wide angle flip-up diffuser for 70° angle, smoothly covering the widest zoom and widening
• Clean, sharp, single-edge barn door shadow OR a very gentle light and shadow transition
with the flip-up wide angle diffuser in place
• Converts from daylight to tungsten via a dichroic flip-down filter
• Color rendition and color distribution is cleaner than comparable LED lights.
• Adjustable support arm allows it to be positioned above and forward. A single, high-power
• Dims extremely smoothly from full blast all the way down to zero without any color change.
• Powers from any 6 V to 18 V DC power source.
• Optional battery shoe is compatible with Sony and Panasonic mini-DV batteries.
• NP-F550 7.2 V, 2000 mA, 105 minute run time.
• NP-F750 7.2 V, 4000 mA, 210 minute run time.
• NP-F950 7.2 V, 6000 mA, 330 minute run time.
When dimmed to 50 % light output, power consumption drops accordingly
resulting in twice the run time. Alternative power from any Anton/Bauer
or PAG system, car cigarette lighter output or battery belt.
• Power consumption is only 8 W despite its high output.
• Operates from -40° C up to +40° C.
• LED power available indicator.
• Frontend bayonet allows you to add future attachments and light modifiers.
Size: 4.7″ x 2.5″ x 4.8″ (12 x 6,4 x 12,4 cm)
Weight: 370 g
DLOBML – LEDZILLA – Dimensions
The Strobist Collection
一套 20 隻 Color Filter
一包 55 張
Office Tel : 3568-0024
WhatsApp : 9744-7610
The self contained Dedolight DLHM4–300 works with an integrated electronic power supply combining:
• New Dedolight Aspherics² optics
• Drastically improved light output
• 24 V/150 W integrated electronic power supply
Versions available for external dimming (SE for EU) and DMX controll (DMX). Please inquire. Available in four different input voltages (four versions):
• 240V (DLHM4–300E+)
• 230 V (DLHM4–300E)
• 120 V (DLHM4–300U)
• 100 V (DLHM4–300J)
Office Tel : 3568-0024